It looks like about 30 amps max at 240V single phase, spindle motor is 3.5KW (~5HP)
https://wiki.artisansasylum.com/imag...00V_Manual.pdf
Hello,
I have the ability to buy an MC-500V. Good price, it is local, and from what i have read, they are good machines. My plan is to rebuild it and convert it over to Mach 3.
Million Dollar questions, I cannot find the power requirements for the machine. I assume that it is going to be 220V / 3 Phase which i can run a VFD from single phase to three phase, but i am worried about the amp draw?
Dose anyone have any idea what the amp draw might be?
Thanks
Michael
Similar Threads:
It looks like about 30 amps max at 240V single phase, spindle motor is 3.5KW (~5HP)
https://wiki.artisansasylum.com/imag...00V_Manual.pdf
Jim Dawson
Sandy, Oregon, USA