Just about anything can be repaired, it depends on what the problem is. You have to find what is loose.
Good Day everybody,
I bought a mc-800vf, but i see after installation i have a play on the work table, is not from the ballscrew it from x Axis slide.
Some body know if i can repair it or the machine is good for garbage?
Thanks
Eric
Similar Threads:
Just about anything can be repaired, it depends on what the problem is. You have to find what is loose.
ok, i work on it a little, i remove the gib block and it is a angle piece for remove the play, is made on steel and plastic and the plastic parts it's slide on the ways. i thing i will remove the table to clean the oïl hole. the ways is ishhh.