Originally Posted by
desmond4518
hello, Mr Sauamikat'
you have helped me in the past with your knowledge.
i have a problem with a Traub TNS 30/42.
the machine will power up ok , no alarms .
when the drives and hydraulic button is pressed the drives are switched on but they are working for only ten seconds and then switching off. this is repeated every time i press the drives on.
there are no NC alarms just A016 when the drives go off, but the alarm is cleared by switching drives off button.
the main drive unit in the machine cabinet is showing a LED indicator status : error on power side or UE OFF at RF ON , the main drive is a AMK arnorld Muller D-7312,
can anyone advise with this problem please.
kind regards
Mr Des Williams