Originally Posted by
crazythunder
So I see Mike is stirring up trouble again.
So you would like for me to prove it how, where, and when??? We do work for Boeing, Ge Aerospace, Fuji, Mitsubishi, Vought, Spirit, and about a half dozen other aerospace companies. Programs from 737 to 787, Apache, Osprey, and other Programs from Top secret to experimental to everyday commercial. Materials Range from O Condition Alum to Titanium Weldments.
Machines I have programmed using Mastercam.
SNK 3 spindle 5 axis 230' x 160" gantry.SNK 6 axis Horizontal SNK HPS-4B, profiler, 5 axis SNK Vertical Profiler FSP120V, SNK Vertical/Horizontal 5 face RB-4VM and RB-2NM, Mitsui-Seiki HU63A-5X 5 axis Horizontal Trunnion, Cincinnati 3 spindle Double Gantry 100' x 120" 5 axis profiler, Hitachi Seiki Horizontals Ranging from 400mm 40 pallet FMS to 1000mm all with either 4 axis indexing or full 4 axis milling, Hitachi Seiki Hi-Cell 4 axis Mill/Turn, Hitachi Seiki Verticals 3 to 4 axis, 3 axis Komo Routers, 5 axis Thermwood Routers, 3,4,5 axis Haas Vertical Mills, 3,4,5 axis Fadal Vertical Mills. 2,3,4 Axis Mazak Slant Bed Lathes with C & Y axis and Dual Spindles. Horizontal Integrex E410-HS What some would consider 9 axis I only Consider 5 axis Mill/Turn, Okuma 2,4 Axis up to Dual Turret Lathes, Yama Seiki 4 axis Vertical, Mighty 4 axis Vertical, Viper Lather 30"swing 72" between Centers, Mazak Vertical Mills 3,4 axis. Those are some of the machine I can think of off the top of my head that I have or are programming. I have programmed Mori's, Kitamura's, Maho's, Sodick Wire, and even made part programs for Swiss Screw Machines. I have in the last 6 months developed my own SYNC method inside of Mastercam for pinch turning and pinch milling using Cantext as my wait code driver. I help people all over the world with Mastercam problems; free of charge and do what I can to better this Industry.
Does Mastercam have faults yes!! Is there any software that does not and is so perfect it puts all programmers out of jobs?? Mike you like to stir up trouble and I applicate your response in the Employment thread, however hashing up a comment from some time ago just to twitch swords accomplishes what exactly? You think I am full of it fine, send me any part you think I can not handle and pay me for my time and I will show you I know what I am talking about if not keep talking out of both side of your mouth. Thanks Rekd for pointing that out. You use Mastercam and are fast at it, yet if anyone else makes that claim we are to be doubted?? I have no reason to lie, my bread and butter comes from Mastercam, I make a very good salary, with awesome benefits and get to work from home 2 days a week thanks to the grace of God for giving me the ability has has given me to understand machining, computers, and manufacturing. You got a problem with that take it up with God.