Need Help! Re Scaling Slots without altering the size of the model


Results 1 to 2 of 2

Thread: Re Scaling Slots without altering the size of the model

  1. #1
    Registered
    Join Date
    Aug 2013
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default Re Scaling Slots without altering the size of the model

    Is it possible to rescale slots on a dxf/cad plan without acctually altering the size of the model? There are times when we have ply delivered it has a 0.5mm difference in thickness. We have therefore had to re-size our plans and end up using more ply and making the models 10 - 15% larger than planed. Thanks

    Similar Threads:


  2. #2
    Member ger21's Avatar
    Join Date
    Mar 2003
    Location
    Shelby Township
    Posts
    35538
    Downloads
    1
    Uploads
    0

    Default Re: Re Scaling Slots without altering the size of the model

    It depends.
    If they are just 2D drawings, then yes. But, if you have a lot of them,could be a long and tedious process.

    Gerry

    UCCNC 2017 Screenset
    [URL]http://www.thecncwoodworker.com/2017.html[/URL]

    Mach3 2010 Screenset
    [URL]http://www.thecncwoodworker.com/2010.html[/URL]

    JointCAM - CNC Dovetails & Box Joints
    [URL]http://www.g-forcecnc.com/jointcam.html[/URL]

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Re Scaling Slots without altering the size of the model

Re Scaling Slots without altering the size of the model