It depends.
If they are just 2D drawings, then yes. But, if you have a lot of them,could be a long and tedious process.
Is it possible to rescale slots on a dxf/cad plan without acctually altering the size of the model? There are times when we have ply delivered it has a 0.5mm difference in thickness. We have therefore had to re-size our plans and end up using more ply and making the models 10 - 15% larger than planed. Thanks
Similar Threads:
It depends.
If they are just 2D drawings, then yes. But, if you have a lot of them,could be a long and tedious process.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)