Small Turning work required


Results 1 to 4 of 4

Thread: Small Turning work required

  1. #1
    Registered
    Join Date
    Jan 2016
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Small Turning work required

    I am looking to have a small item turned and was wondering if someone could provide me with a quote.

    I require an 8mm rod 32mm in length with a m8 (1.25 pitch) thread cut 17mm into one end and 4mm into the other leaving 11mm uncut (I can provide a cad dxf if required).



    The unthreaded section will eventually hold a needle roller bearing so will need to be relatively hard. I have some 8mm 304 precision ground stainless steel rod that may be suitable subject to your advice.

    Thanks,
    Adsey

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Small Turning work required-bearing-holder-jpg  


  2. #2
    Registered
    Join Date
    Jul 2015
    Posts
    18
    Downloads
    0
    Uploads
    0

    Default Re: Small Turning work required

    Quantity?

    Sent from my LG-V410 using Tapatalk



  3. #3
    Registered
    Join Date
    Jan 2016
    Posts
    3
    Downloads
    0
    Uploads
    0

    Default Re: Small Turning work required

    Quantity: 1



  4. #4

    Default Re: Small Turning work required

    Hi,
    Is this possible to provide your email contact to us at this email address sl.wong@prototree.com
    We will like to discuss further with you on this parts. Thanks.

    BR
    /SL Wong
    Sales Manager
    Proto Tree LLC
    Website: Proto Tree
    Email: sl.wong@prototree.com



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Small Turning work required

Small Turning work required