Revised Bills of Material for HP UHU Drives

[tenmetalman]

Hello All,
Here's revised Bills of Material for the HP UHU drives, Under 11amp cont. & over 11amps cont.
Paul
Something about Open Office files, they won't load I'll work on it.............

[tenmetalman]

Hey,
anybody got any idea's about why I can't get the revised parts lists to load ?
the files are Open Office version 2.43 I think.
Paul

[contactirfu]

Zip them up paul or make a pdf of it.

[tenmetalman]

Here we go, thanks Irfan,
Paul

[tenmetalman]

Hi,
After loading the revised parts list I realized that one of the first part had no value assigned to it. So heres the second revision for both the above 11amps & below 22amps
Paul

[tenmetalman]

I've had several requests for a current bill of material. the first four pages of the revisions shown in post prior to this one are the latest revision.
Paul

[tenmetalman]

Hey All,
I'm working on a updated revision that will be ready in the next three or four days. this one will include all pages which should eliminate a lot of confusion.
Thanks
Paul

[tenmetalman]

revision dosn''t want to load.

[tenmetalman]

Hey All,
H.O. caught an error. Thanks H.O. I've changed the enclosed to reflect the correction. here's the current revision for the under 11amps continuous build
Paul

[H.O]

Hi Paul,
Nice work! One question though, the two inductors L1 & L2, are you sure about the part number on those?

The partnumber seems to indicate it's a 2.7uH inductor and not 1.2uH as the description says. So it looks like either the description is wrong or the partnumber is. The schematic specifies 1.2uH though....

/Henrik.

[tenmetalman]

Hey,
H.O. caught an old error that keeps creeping back into the parts list ! I've corrected them one more time. S.O. numbers 11 & 13.
Thanks H.O.
Paul

[tenmetalman]

This is still the current parts list. where the schematics & the Parts list differ the parts list are correct.