I have a part file with numerous tool's being used, but when I try to generate one tool path I get this warning, & don't know what to fix in order to get rid of the message . Picture in Zip Folder. Thank's in advance.
Harold C.
Looks to me like you have an older Shops package. These packages were designed to get new users up and runinng fast. They are not even offered anymore by Siemens. looks to me like you are running in NX6 based on the tri-ax in the lower left hand corner. I am guessing you are trying to cut the part with a cut pattern that was developed in a later version that requires a seperate license, or is just not available in Shops because of limitations.
Thank's for the info. I had to delete these operation's, and re-select geometry in order to do these operations. This is a old fixture on which we run a family of parts. Using NX5 also. Thank's.
Harold C.
Posting Permissions
LinkBack URL
About LinkBacks
