Attached is a NX4 prt file and the nc output. After I modified my 4-axis wireedm post i am getting this output.
Just note the blocks in RED. why it is giving me 4 arc movements instaed of one. I mean after the liear movement
G01 X-35.84 Y40 G01 U-15.84 V20
cant i directly get
G03 X40. Y35.84 I0 J5 G03 U-20 V15.84 K0 L5
Normally programming directly on the machine follow this but whats wrong with NX4 or the post processor?
Please note my post is nothing but a copy of UG ISO wireedm post with upper plane letters changed to U, V, K and L.