Yes, as long as it uses a master and slave motor.
Does UCCNC support dual homing switch on one axis? This would allow the gantry to be squared each time the machine is homed.
Thanks
Similar Threads:
Yes, as long as it uses a master and slave motor.
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
^ that is pretty cool.