Reply with QuoteThe default CV parameters are setup for metric use. I think you need to divide them by 25.4 for inches, which should give you much better results.
Did the screenset update I sent you work OK?
Curves not smooth
I have a file I cut with the new uccnc and uc100 set up I bought. The curves are like short lines instead of nice arcs. I dropped the exact file into Mach3 and it cut the arcs the way it was supposed to. Same file, not altered. Also on a outer profile cut it would pause for a split second when it went from a straight line to an arc. Help please.
Sent from my iPhone using Tapatalk Pro
Similar Threads:
- Need Help!- tb6560 x axis is grinding y is smooth z is smooth im a newbie
- AutoCAD (.dxf) curves importing into Enroute very choppy (not smooth)
- Need Help!- Faceting on smooth curves?
- Newbie- RPM vs. HP Curves
- Need Help!- How do you get nice smooth curves (almost like bezier curves in photoshop) in Bobcad?
Re: Curves not smooth
The default CV parameters are setup for metric use. I think you need to divide them by 25.4 for inches, which should give you much better results.
Did the screenset update I sent you work OK?
Gerry
UCCNC 2017 Screenset
[URL]http://www.thecncwoodworker.com/2017.html[/URL]
Mach3 2010 Screenset
[URL]http://www.thecncwoodworker.com/2010.html[/URL]
JointCAM - CNC Dovetails & Box Joints
[URL]http://www.g-forcecnc.com/jointcam.html[/URL]
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Re: Curves not smooth
Yes the new screen worked great. I'll try changing the cv adjustments. Thank you.
Sent from my iPhone using Tapatalk Pro
