Huanyang VFD Macro/ Plugin - Page 11

Page 11 of 32 FirstFirst ... 89101112131421 ... LastLast
Results 121 to 132 of 376

Thread: Huanyang VFD Macro/ Plugin

  1. #121
    Registered
    Join Date
    Mar 2010
    Location
    America
    Posts
    684
    Downloads
    0
    Uploads
    0

    Default Re: Huanyang VFD Macro/ Plugin

    Thank you for details/help. Fortunately for me i was able to immediately determine last night what my very stupid problem was once I looked at code. The message box is in a static method being called from another class in static method. The connection window is the problem.

    I test on Windows 8.1 64 bit with serial port monitor but disable window because that comp isn't connected to VFD, than bring to machine comp(win xp) and actually test how it functions. Surprisingly Windows XP 32 bit didn't care about this error and plugin worked perfectly. Once I forced messagebox window to display on win 8.1(it didn't) I was able to see the problem you're experiencing.

    I'm off to work now and will clean this up and repost tonight when I get home.

    Thanks for your help,
    Dan



  2. #122
    Community Moderator ger21's Avatar
    Join Date
    Mar 2003
    Location
    United States
    Posts
    30564
    Downloads
    0
    Uploads
    0

    Default Re: Huanyang VFD Macro/ Plugin

    I should have added that I'm using Windows 10 Pro, x64.
    Glad you found it.
    I have a wedding to go to today, so can't do anything until tomorrow anyway.

    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  3. #123
    Registered
    Join Date
    Mar 2010
    Location
    USA
    Posts
    29
    Downloads
    0
    Uploads
    0

    Default Re: Huanyang VFD Macro/ Plugin

    I did some checking and did do the PWM check box with apply and save again. Still no motion on the spindle.

    I took some screen shots to see if that would help in the troubleshooting.

    See attached PDF.

    Thanks again for all of the help

    Regards,
    Bob

    Attached Thumbnails Attached Thumbnails Huanyang VFD Macro/ Plugin-current_settings_rjh-pdf  


  4. #124
    Community Moderator ger21's Avatar
    Join Date
    Mar 2003
    Location
    United States
    Posts
    30564
    Downloads
    0
    Uploads
    0

    Default Re: Huanyang VFD Macro/ Plugin

    As I said last night, version 1.00097 is broken. Try using the 95 or 96 versions.
    When you start UCCNC, you should see a pop up window saying the VFD is connected. If you don't get this window, it won't work.

    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  5. #125
    Registered
    Join Date
    Mar 2010
    Location
    USA
    Posts
    29
    Downloads
    0
    Uploads
    0

    Default Re: Huanyang VFD Macro/ Plugin

    I installed 95 with no change.

    Interesting, I wasn't aware of a pop-up. I am not getting any pop-up on startup of UCCNC. I am wondering if I should uninstall and reinstall everything.



  6. #126
    Community Moderator ger21's Avatar
    Join Date
    Mar 2003
    Location
    United States
    Posts
    30564
    Downloads
    0
    Uploads
    0

    Default Re: Huanyang VFD Macro/ Plugin

    Did you go into the plugin and reconfigure it:
    In the plugin, when you click "Press for available Ports", does it find your port?
    And are you clicking both the save port, and save settings (calibrate in older version)?
    Then restart UCCNC.

    Did you change the VFD settings as stated in the .txt file. There are 5 or 6 VFD settings that you have to change.
    If you're not getting a popup window as soon as UCCNC starts, then the plugin is not setup right, or not communicating with the VFD.

    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  7. #127
    Registered
    Join Date
    Mar 2010
    Location
    USA
    Posts
    29
    Downloads
    0
    Uploads
    0

    Default Re: Huanyang VFD Macro/ Plugin

    Gerry,

    When I configured the plugin earlier it did find the port when I clicked available ports. It matches what I expected to see. These were saved and then UCCNC restarted. I had also verified all of the pid settings outlined in the document with my VFD and everything was appropriate.

    Regards,
    Bob



  8. #128
    Registered
    Join Date
    Mar 2010
    Location
    America
    Posts
    684
    Downloads
    0
    Uploads
    0

    Default Re: Huanyang VFD Macro/ Plugin

    Quote Originally Posted by bhouin View Post
    Gerry,

    When I configured the plugin earlier it did find the port when I clicked available ports. It matches what I expected to see. These were saved and then UCCNC restarted. I had also verified all of the pid settings outlined in the document with my VFD and everything was appropriate.

    Regards,
    Bob
    Hey Bhouin sorry for your troubles, all settings look good other than your using HY97 that I recently discovered had a problem thanks to you and ger21. I didn't get a chance to fix yet and you should use HY95 like ger21 suggested and is for now the latest recommended version.

    Follow the step by step in setup instructions in HY95 zip file and you shouldn't have a problem.


    Dan

    Last edited by Dan911; 04-22-2017 at 10:38 PM.


  9. #129
    Community Moderator ger21's Avatar
    Join Date
    Mar 2003
    Location
    United States
    Posts
    30564
    Downloads
    0
    Uploads
    0

    Default Re: Huanyang VFD Macro/ Plugin

    Quote Originally Posted by bhouin View Post
    I installed 95 with no change.

    Interesting, I wasn't aware of a pop-up. I am not getting any pop-up on startup of UCCNC. I am wondering if I should uninstall and reinstall everything.
    What are you using for the RS-485 connection? Are you sure that it's wired correctly?

    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  10. #130
    Registered
    Join Date
    Mar 2010
    Location
    America
    Posts
    684
    Downloads
    0
    Uploads
    0

    Default Re: Huanyang VFD Macro/ Plugin

    Quote Originally Posted by bhouin View Post
    I installed 95 with no change.

    Interesting, I wasn't aware of a pop-up. I am not getting any pop-up on startup of UCCNC. I am wondering if I should uninstall and reinstall everything.
    Sorry missed this 1.

    Since you posted in your background you were controlling your Huanyang VFD with a RS485 connection in Mach3 I'm assuming you have that setup correctly. I'm also assuming you're using a typical China spindle 400hz/24000 rpm by settings you posted.

    What Huanyang plugin were you using for connection with Mach3? The Le royaume Huanyang plugin you had a choice for VFD address in the Huanyang VFD settings (PD163), this setting needs to be 1. Yes, you should get a "Connected" window on start up like ger21 already pointed out, make sure this window isn't buried behind other windows because the plugin won't start until you hit ok. If you close UCCNC you will never see this window.

    Dan
    .



  11. #131
    Registered
    Join Date
    Mar 2010
    Location
    America
    Posts
    684
    Downloads
    0
    Uploads
    0

    Default Re: Huanyang VFD Macro/ Plugin

    Hi Gerry, would you mind if I emailed you HYPLUGIN with the connection window fixed?

    I just cut a part and know it's working well but don't have your screenset loaded in machine comp yet, it has a old version of Win XP and plan on updating OP than will install, but didn't get around to it yet. I want to make sure all working good on that end.

    Dan



  12. #132
    Community Moderator ger21's Avatar
    Join Date
    Mar 2003
    Location
    United States
    Posts
    30564
    Downloads
    0
    Uploads
    0

    Default Re: Huanyang VFD Macro/ Plugin

    Yeah, that's fine. Send it over and I'll go out and test it.

    I'm going to create a new profile from scratch to make sure It's set up properly.

    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


Page 11 of 32 FirstFirst ... 89101112131421 ... LastLast

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Huanyang VFD Macro/ Plugin
Huanyang VFD Macro/ Plugin