Any more on this?
I just picked up a UC300ETH-LPT5 and the software.
Still looking into a laser, and this seems pretty wild to be able to cut something, then color it after
Looking for something like this: EleksMaker
I just wanted to show you guys a new development on the UCCNC software which development we were working on for a while and just finished.
This development was about to give better support for laser machine applications.
The developments contains 3 parts/modules:
1.) Scan type laser engraving with 8bit PWM (for tone control) output on the laser pin.
2.) Black and white and halftone high resolution scan type engraving.
3.) M10/M11 codes for syncronous fast output control to support laser cutting applications.
The new developments will be available soon in the next development type release.
Some pics and vids:
Similar Threads:
Any more on this?
I just picked up a UC300ETH-LPT5 and the software.
Still looking into a laser, and this seems pretty wild to be able to cut something, then color it after
Looking for something like this: EleksMaker
My Build: http://www.cnczone.com/forums/diy-cnc_router_table_machines/113711-my_build_-_many_thanks.html
okay, just came across this:
And this: https://jtechphotonics.com/?page_id=3905
My Build: http://www.cnczone.com/forums/diy-cnc_router_table_machines/113711-my_build_-_many_thanks.html