LinkBack URL
About LinkBacks
Hello again,
I guess the file is too big to uploaded on the forum. It can be downloaded from the following link: http://savefile.com/projects/561668
I apologize for the inconvenience.
Regards,
Sorin
Let me try attaching the file again...
Sorin
Any society that would give up a little liberty to gain a little security will deserve neither and lose both.
Benjamin Franklin
Hello again,
I guess the file is too big to uploaded on the forum. It can be downloaded from the following link: http://savefile.com/projects/561668
I apologize for the inconvenience.
Regards,
Sorin
Any society that would give up a little liberty to gain a little security will deserve neither and lose both.
Benjamin Franklin
Video on how to generate tool paths can be downloaded from:
http://www.savefile.com/files/3782392
Regards,
Sorin
Any society that would give up a little liberty to gain a little security will deserve neither and lose both.
Benjamin Franklin
Last File (How to generate G code) uploaded and ready at:
http://savefile.com/projects/699088
Hope to hear your comments.
Sorin
Any society that would give up a little liberty to gain a little security will deserve neither and lose both.
Benjamin Franklin
I get voice but no vidio am I doing something wrong?
thanks Kenneth
web-www.lambertsrc.com
Learning CNC
Ken,
I have played them on my PC and they work fine. They are AVI files that are played with windows media player. I have created a DVD file with all 3 of them plus a menu but I need to find a way to zip the whole folder so I can upload it to www.savefile.com. I will let you know if I find anything else.
Best regards,
Sorin
Any society that would give up a little liberty to gain a little security will deserve neither and lose both.
Benjamin Franklin
Ok thanks
thanks Kenneth
web-www.lambertsrc.com
Learning CNC
They work just fine on my desktop so I must have the wrong settings on my laptop thanks for takeing the time to do this for us.
thanks Kenneth
web-www.lambertsrc.com
Learning CNC
I don't know why but neither my real player or my windows media player works with this video.
However the player from the software company Sorin records this with will work. It can be downloaded for free at this sight.
http://www.techsmith.com/products/studio/player.asp
I will check more into why this will not play AVI with windows media.
Tim
I found the problem which is detailed here.
http://techsmith.custhelp.com/cgi-bi...i=&p_topview=1
It boils down to the codec is not installed on the system used by Camtasia to record the file. This needs to be installed on the system before windows media will play the file.
To download a codec for this AVI format you can go to this sight. Run the codec install and real media or windows media players will play the file.
http://www.techsmith.com/download/co...lid=CodecsHome
Someone else said the above link no longer works so here is the new link
http://www.techsmith.com/download/codecs.asp
Last edited by tjones; 01-17-2006 at 04:23 PM.
that fixed it thanks
I wish I was that smart
thanks Kenneth
web-www.lambertsrc.com
Learning CNC
I was in one of Sorin's classes and he gave us tutorials aready made with the software. That is how I knew what he used. I just went to the web sight for that company and went through the support page. Nice little recording program. Anyhow it wasn't smarts it was just snoops.
Posting Permissions
