| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| TurboCNC Discuss TurboCNC controller software here! |
| | |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
06-25-2004, 11:34 PM
| |||
| |||
Does anyone know if the GCode generated from MasterCam is combatable with TurboCNC ? I am building a home CNC Mill and I have access to MasterCam at work ( and occasional I can take the dongle home ). I have a 3 axis homeCNC chopper stepper controller. Any help would be great, Thanks Joel    |
|
#2
06-26-2004, 12:45 AM
| ||||
| ||||
| Joel, Its just a matter of choosing the correct machine post before you generate the gcode. The special requirements of various controllers are taken care of by the "configuration of the post", as we call it. You can likely ask some of the guys at your workplace to point you to the correct place to make the settings.
__________________ First you get good, then you get fast. Then grouchiness sets in. (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |
|
#3
06-26-2004, 08:29 AM
| ||||
| ||||
| I think there is a MasterCAM post for TurboCNC at the TurboCNC Yahoo group.
__________________ Gerry Mach3 2010 Screenset http://home.comcast.net/~cncwoodworker/2010.html (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| How do i get my autocad file onto mastercam? | EdE | General CAM Discussion | 3 | 02-23-2011 12:54 AM |
| turbocnc and cams gcode | Lu_ca | TurboCNC | 1 | 07-12-2006 07:50 AM |
| Bold Tool Path Lettering in MasterCam Operations Manager | ngr1 | Mastercam | 2 | 06-08-2005 07:58 AM |
| Mastercam Jingle Bells | Rekd | Mastercam | 3 | 01-02-2005 02:20 PM |
| GcodeOut - Export gcode to Turbocnc | wjbzone | Autodesk Software (Autocad, Inventor etc) | 18 | 04-14-2004 08:22 AM |
| | |
Linear Mode
