| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| TurboCNC Discuss TurboCNC controller software here! |
| | |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
11-13-2007, 11:20 PM
| |||
| |||
Hi I need a Enroute 3 post processor for TurboCNC or can I modify a machine driver to suit my needs.Im new to TurboCNC after ditching Mach 3 because of endless problems.What file format do my G code files need to be in for TurboCNC to read them, I am using Enroute 3 to generate my toolpaths. Pls Help Edmond  |
|
#2
11-14-2007, 06:32 AM
| ||||
| ||||
| Generally speaking, Turbocnc uses the RS-274 D "standard" for codes. Your best bet is to review the doc. file as it will give you the info you need. Can't help you with Enroute as I don't use that one. The biggest thing is to get the extra parameters correct for some of the functions. The manual can be found on the home page http://www.dakeng.com/ about 3/4 of the way down.
__________________ Art AKA Country Bubba (Older Than Dirt) |
|
#3
12-26-2007, 01:29 PM
| |||
| |||
Do you have the Enroute postprocessor for Mach3? |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| enroute pro 3.3 post for fanuc 0Mb needed | goodplastics | General CAM Discussion | 1 | 08-07-2007 11:47 PM |
| fanuc drill mate / robo drill post for enroute? | goodplastics | Post Processor Files | 0 | 07-19-2007 05:49 PM |
| bobcad post processor for turbocnc | Pbrew1 | TurboCNC | 5 | 08-01-2006 02:38 AM |
| mastercam post for turbocnc 4 | jaypal | TurboCNC | 0 | 07-12-2006 06:30 AM |
| Gibbs post for turboCNC? | gjahnke | GibbsCAM | 9 | 03-09-2006 06:46 PM |
| | |
Linear Mode
