bobcad post processor for turbocnc

[Pbrew1]

Does anyone know what post processor in bobcad v21 to use with turbocnc?

Thanks,

[tobyaxis]

http://www.bobcad.com/index.php?select_page=posts_index

Check here they may have something for you. If they don't call and they will make one for you free of charge One benifit of being a BCC user Also BCC will customize a post processor for you, free of charge.

I saw two for Turbo CNC. One for Mills and the other for Lathes

As you get used to BCC you will learn to write your own post processors and write your own scripts to use with them.

[tobyaxis]

Here is your post processor from the BCC website listed above. I do advise visiting their site. You can also join the BCC Forum.
http://216.117.147.20/bobcadsupport/forums/

[Pbrew1]

Thanks for the info, I didnt realize they had post for these various programs. I tried the post but there where still problems. I plan to try mach2, maybe I will have better luck.

[tobyaxis]

Call BobCad, they will help you with the post for FREE. They will even Custom Make a Post For you FREE of Charge. Post Here in the BobCad Forum or got to BobCad's Support Forum.

http://216.117.147.20/bobcadsupport/forums/index.php

They will help you make a post via phone or on the web via Viewer Support Tool.

[lakeside]

you can also try Fanuc 6m simplified