| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| TurboCNC Discuss TurboCNC controller software here! |
| | |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#1
 
07-22-2006, 07:54 PM
| ||||
| ||||
Now to my setup. Knowing now that my screws have .5 pitch How do I calculate my scale? at 10 microsteps I think .000125 is this correct? search engine on the yahogroups sux. EDIT: Motors are 200 step/rev
__________________ Mhel "me and my unselfish genes"  |
|
#2
07-22-2006, 10:38 PM
| ||||
| ||||
| .00025 1 inch divided by (2 turns per inch x 200 steps per turn x 10 microsteps)
__________________ Gerry Mach3 2010 Screenset http://home.comcast.net/~cncwoodworker/2010.html (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management) |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
| | |
Linear Mode
