Can anyone tell me how to open constraints?
Not sure what you mean by "open" constraints. Constraints is provided by a set of tools. If these tools are not showing then go to - view - tool bars - scroll down to constraints - click on constraints to put a tick in the box then click -Ok and the tools should appear as a set of tools.
Regards
Phil
Originally Posted by southernexplore
I mean just what you explained but there is no constraints option in the toolbar.
What do I do?
Thanks
southernexplorer
I am using TCC 3. Which is TC v11 + CAM. Possibly constraints is not implimented in Delux v11. Is it listed in your manual/help. Do you have constraints in the options pulldown menu.
Regards
Phil
It looks like it's only in Professional, according to their website. (which doesn't actually have much info)
Gerry
Mach3 2010 Screenset
http://home.comcast.net/~cncwoodworker/2010.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
It is in the HELP file and it is not on my sofware anywhere.
southernexplorer
They probably use a common help file for their different versions. You might want to contact them to find out.
Gerry
Mach3 2010 Screenset
http://home.comcast.net/~cncwoodworker/2010.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
Posting Permissions
LinkBack URL
About LinkBacks
