Need Help! Cant export or save as G-code


Results 1 to 5 of 5

Thread: Cant export or save as G-code

  1. #1
    Registered Jiminator's Avatar
    Join Date
    Jan 2015
    Location
    US
    Posts
    14
    Downloads
    0
    Uploads
    0

    Default Cant export or save as G-code

    Hello im looking for some one local to Murrieta, CA if possible or we can use something like WebX. I want to cut some simple parts from carbon fiber plates about 1mm think. Simple shapes squares circles etc for an RC plane. I can draw the shapes but i cannot get the cam software to work so i can export or save it as G-code. I have cut parts using the Mach 3 mill software which is very simple, but not using TurboCad. I have TurboCad 19 Platinum with the cam plugin. I also paid IMSI design $75 an hour for a 1 hour personaly training session but the person helping me did not know how to save as gcode and has no experience with the cam software.

    Thank you,

    Jim

    Similar Threads:


  2. #2
    Member
    Join Date
    Jul 2009
    Location
    USA
    Posts
    12
    Downloads
    0
    Uploads
    0

    Default Re: Cant export or save as G-code

    Saw your post today. I see that it's from quite a while ago. If you still need an answer... In the cam screen you will see your operations. Just right click on the one you want to save and a menu pops up with the choice to save it.



  3. #3
    Registered Jiminator's Avatar
    Join Date
    Jan 2015
    Location
    US
    Posts
    14
    Downloads
    0
    Uploads
    0

    Default Re: Cant export or save as G-code

    Hello thanks for your reply. I figured out how to save Gcode but have a new problem. Lets say i draw a 5mm x 5mm square when i cut it out it is smaller approx 3.8x3.8mm, basically 1.2mm smaller, which is the size of my tool. The tool follows the path down the middle on the cad line rather than offset to the inside or outside. Do you know how i change this?

    Thanks Jim



  4. #4
    Member
    Join Date
    Jul 2009
    Location
    USA
    Posts
    12
    Downloads
    0
    Uploads
    0

    Default Re: Cant export or save as G-code

    I was having the same problem just today on a project. When you are in the Tool Store and you have chosen a tool, check the "Stepover, Rough, and Finish" settings. In my case, I set Stepover to 1/2 the diameter of the cutter, Rough to 0, and then what ever finish setting you want. That should fix your problem.

    Bob



  5. #5
    Registered Jiminator's Avatar
    Join Date
    Jan 2015
    Location
    US
    Posts
    14
    Downloads
    0
    Uploads
    0

    Default Re: Cant export or save as G-code

    Thanks Bob i'll give that a try

    Jim



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Cant export or save as G-code

Cant export or save as G-code