Id assume you mean a J425 with dynapath control? Just fyi, Bob at ZPS has the pulley set and Pic chip still....
Sent from my A3-A20FHD using Tapatalk
I am considering turning down my 3k spindle sheave on my MJ 425 (to get 6k)
Anyone have dimensions for the 6k spindle pulley?
Thanks,
Nate.
Also, if anyone has a copy of manuals/drawings etc, I would love to have them emailed to me. natefoerg @ Gmail dot com
Similar Threads:
Nate.
Ann Arbor Meechigan
Id assume you mean a J425 with dynapath control? Just fyi, Bob at ZPS has the pulley set and Pic chip still....
Sent from my A3-A20FHD using Tapatalk
Yes, a J425. however, the original control has been removed and replaced with Mach3 with a controller I built.
I have a lead on a 6k driven pulley.
Anyone know what the bearing numbers are, for the top of the driven pulley and the duplex pair at the bottom of the driven pulley?
Nate.
Ann Arbor Meechigan
Sadly, my lead on the 6k driven pulley did not pan out.
Nate.
Ann Arbor Meechigan