Tree Journeyman 325 with a delta 20 controller

[Jdracing55]

I am going to look at buying a Journeyman 325 with a delta 20 controller on Thursday. I was wondering if anybody has a sample program I could use as well as how to load it to test the machine and see if there are faults. I run a tree Journeyman 300 at work but it has a Allen Bradley controller and I also run a Haas VF4 and TM1. I have never programed a Dynapath controller and from what I hear the format is quiet a bit different than a Haas. If there is any other info you can give me to help evaluate the machine I would really appreciate it.

Thanks
Jimmy

Similar Threads:

• The correct way to reference a Tree journeyman J325 with delta 20 controller
• Newbie- Journeyman 425 help? Delta Tau controller
• Tree Delta 10MU Controller for Trade
• Tree Journeyman 250 or 325
• (NEED HELP) TREE Journeyman 250

[sld4121]

I can look through my old manuals to see what I have.
Let me know if you are interested - as I would have to have them copied.
And, yes, the Dynapath is a weird duck, but it did have some redeeming factors when doing simple programming at the machine.

[Jdracing55]

I got it working, thank goodness there were some really easy instructions and a sample program that came with it. The biggest problem I had was getting it reference zeroed again because the guy I got it from had it way off. The Y axis kept faulting out in the middle of its travel so I thought it was the Y axis servo but all that was really wrong was the machine was lost. I even took the Y axis servo motor apart and cleaned it before I realized what was really causing it to fault out. Now im working on getting it hooked up to my computer so I can try running some good programs.