Can someone check this code for Dyna 20

[cnctoolman]

I am looking at purchasing a nice used Journeyman 325 with the Dynapath 20 control on it. I have an appointment coming up to go inspect it in person. I did a simple program up in my CAD/CAM and would like someone who is familiar with the control to go over and see if my post is outputting the correct code. I am more familiar with Fanuc style code.

Thanks for any help in advance.

1/4" tool used for all operations.

First operation

Drill down .5" pecking with full retract .1 deep at a time

Mill an inside square pocket 2"x2"

Final- mill an outside 4" diameter circle with a .250 lead in /lead out radius

(1)$
N2(T)TOOL 1$
N4(T)OPERATION 1$
N6(9)T0001M6E54$
N8(9)M8$
N10(9)M3S3000$
N12(0)X0Y0$
N14(0)Z0$
N16(0)Z0.1$
N18(0)X0Y0Z-0.5K0.1W0.1F5.0G3$
N20(0)Y0.5$
N22(0)X0.5Y0$
N24(0)X0Y-0.5$
N26(0)X-0.5Y0$
N28(0)G0$
N30(T)TOOL 1$
N32(T)OPERATION 2$
N34(0)X0$
N36(1)Z-0.05$
N38(1)Y-0.125$
N40(1)X0.125F50.0$
N42(1)Y0.125$
N44(1)X-0.125$
N46(1)Y-0.125$
N48(1)X0$
N50(1)Y-0.25$
N52(1)X0.25$
N54(1)Y0.25$
N56(1)X-0.25$
N58(1)Y-0.25$
N60(1)X0$
N62(1)Y-0.375$
N64(1)X0.375$
N66(1)Y0.375$
N68(1)X-0.375$
N70(1)Y-0.375$
N72(1)X0$
N74(1)Y-0.5$
N76(1)X0.5$
N78(1)Y0.5$
N80(1)X-0.5$
N82(1)Y-0.5$
N84(1)X0$
N86(1)Y-0.625$
N88(1)X0.625$
N90(1)Y0.625$
N92(1)X-0.625$
N94(1)Y-0.625$
N96(1)X0$
N98(1)Y-0.75$
N100(1)X0.75$
N102(1)Y0.75$
N104(1)X-0.75$
N106(1)Y-0.75$
N108(1)X0$
N110(1)Y-0.875$
N112(1)X0.875$
N114(1)Y0.875$
N116(1)X-0.875$
N118(1)Y-0.875$
N120(1)X0$
N122(0)Z0.1$
N124(0)Y0$
N126(0)Z0.05$
N128(1)Z-0.1F5.0$
N130(1)Y-0.125$
N132(1)X0.125F50.0$
N134(1)Y0.125$
N136(1)X-0.125$
N138(1)Y-0.125$
N140(1)X0$
N142(1)Y-0.25$
N144(1)X0.25$
N146(1)Y0.25$
N148(1)X-0.25$
N150(1)Y-0.25$
N152(1)X0$
N154(1)Y-0.375$
N156(1)X0.375$
N158(1)Y0.375$
N160(1)X-0.375$
N162(1)Y-0.375$
N164(1)X0$
N166(1)Y-0.5$
N168(1)X0.5$
N170(1)Y0.5$
N172(1)X-0.5$
N174(1)Y-0.5$
N176(1)X0$
N178(1)Y-0.625$
N180(1)X0.625$
N182(1)Y0.625$
N184(1)X-0.625$
N186(1)Y-0.625$
N188(1)X0$
N190(1)Y-0.75$
N192(1)X0.75$
N194(1)Y0.75$
N196(1)X-0.75$
N198(1)Y-0.75$
N200(1)X0$
N202(1)Y-0.875$
N204(1)X0.875$
N206(1)Y0.875$
N208(1)X-0.875$
N210(1)Y-0.875$
N212(1)X0$
N214(0)Z0.1$
N216(0)Y0$
N218(0)Z0$
N220(1)Z-0.15F5.0$
N222(1)Y-0.125$
N224(1)X0.125F50.0$
N226(1)Y0.125$
N228(1)X-0.125$
N230(1)Y-0.125$
N232(1)X0$
N234(1)Y-0.25$
N236(1)X0.25$
N238(1)Y0.25$
N240(1)X-0.25$
N242(1)Y-0.25$
N244(1)X0$
N246(1)Y-0.375$
N248(1)X0.375$
N250(1)Y0.375$
N252(1)X-0.375$
N254(1)Y-0.375$
N256(1)X0$
N258(1)Y-0.5$
N260(1)X0.5$
N262(1)Y0.5$
N264(1)X-0.5$
N266(1)Y-0.5$
N268(1)X0$
N270(1)Y-0.625$
N272(1)X0.625$
N274(1)Y0.625$
N276(1)X-0.625$
N278(1)Y-0.625$
N280(1)X0$
N282(1)Y-0.75$
N284(1)X0.75$
N286(1)Y0.75$
N288(1)X-0.75$
N290(1)Y-0.75$
N292(1)X0$
N294(1)Y-0.875$
N296(1)X0.875$
N298(1)Y0.875$
N300(1)X-0.875$
N302(1)Y-0.875$
N304(1)X0$
N306(0)Z0.1$
N308(0)Y0$
N310(0)Z-0.05$
N312(1)Z-0.2F5.0$
N314(1)Y-0.125$
N316(1)X0.125F50.0$
N318(1)Y0.125$
N320(1)X-0.125$
N322(1)Y-0.125$
N324(1)X0$
N326(1)Y-0.25$
N328(1)X0.25$
N330(1)Y0.25$
N332(1)X-0.25$
N334(1)Y-0.25$
N336(1)X0$
N338(1)Y-0.375$
N340(1)X0.375$
N342(1)Y0.375$
N344(1)X-0.375$
N346(1)Y-0.375$
N348(1)X0$
N350(1)Y-0.5$
N352(1)X0.5$
N354(1)Y0.5$
N356(1)X-0.5$
N358(1)Y-0.5$
N360(1)X0$
N362(1)Y-0.625$
N364(1)X0.625$
N366(1)Y0.625$
N368(1)X-0.625$
N370(1)Y-0.625$
N372(1)X0$
N374(1)Y-0.75$
N376(1)X0.75$
N378(1)Y0.75$
N380(1)X-0.75$
N382(1)Y-0.75$
N384(1)X0$
N386(1)Y-0.875$
N388(1)X0.875$
N390(1)Y0.875$
N392(1)X-0.875$
N394(1)Y-0.875$
N396(1)X0$
N398(0)Z0.1$
N400(0)Y0$
N402(0)Z-0.1$
N404(1)Z-0.25F5.0$
N406(1)Y-0.125$
N408(1)X0.125F50.0$
N410(1)Y0.125$
N412(1)X-0.125$
N414(1)Y-0.125$
N416(1)X0$
N418(1)Y-0.25$
N420(1)X0.25$
N422(1)Y0.25$
N424(1)X-0.25$
N426(1)Y-0.25$
N428(1)X0$
N430(1)Y-0.375$
N432(1)X0.375$
N434(1)Y0.375$
N436(1)X-0.375$
N438(1)Y-0.375$
N440(1)X0$
N442(1)Y-0.5$
N444(1)X0.5$
N446(1)Y0.5$
N448(1)X-0.5$
N450(1)Y-0.5$
N452(1)X0$
N454(1)Y-0.625$
N456(1)X0.625$
N458(1)Y0.625$
N460(1)X-0.625$
N462(1)Y-0.625$
N464(1)X0$
N466(1)Y-0.75$
N468(1)X0.75$
N470(1)Y0.75$
N472(1)X-0.75$
N474(1)Y-0.75$
N476(1)X0$
N478(1)Y-0.875$
N480(1)X0.875$
N482(1)Y0.875$
N484(1)X-0.875$
N486(1)Y-0.875$
N488(1)X0$
N490(0)Z0.1$
N492(T)TOOL 1$
N494(T)OPERATION 3$
N496(0)X-0.2622Y2.3737$
N498(1)Z-0.125F5.0$
N500(2)X-0.0109Y2.125I-0.0122J2.375D1$
N502(2)I0J0F50.0D0$
N504(2)X0.2378Y2.3763I-0.0122J2.375D1$
N506(0)Z0.1$
N508(9)M30$
END$

[T0DD]

Greetings-
I cannot advise on conversational, but see below.
Todd

[T0DD]

Greetings-

I posted an EIA example for you in the other forum.
Todd

[C squared]

It would take way too long to write out everything that is wrong with that program.If you want PM me your phone number and I'll walk you thru what needs to be changed.

Almost all of our machines at work at work use the Dynapath controls.