Shift knobs

[hot knobs]

Hot August Nights Reno NV, August 5th to the 12th not a cnc show, lots of parts are cnc made mine are not. I hope I am not in the wrong category, if so reprimand me but don't kick me out thanks. I have made the knobs for Hi End hot rods, going to take them to the swap meet on the 9th to the 11th, if there is some demand for them I am going to need a cnc lathe that will take 1" stock ,turn 3"x 4" or more with a tail stock, could use one that does not hold close tolerances any more, these are all made by hand on a 14x40 out of bronze nickel silver 6061 aluminum brass stablized wood micarta amber & mother of purle, some are hand engraved.

[tobyaxis]

These are very nice Knobs. Have you checked with any Used CNC Machine Tool Dealers???

[cnczoner]

Very nice! You should check out the Turkey Rod Run on Thanksgiving weekend in Daytona. HUGE show (IIRC the largest hot-rod show & swap meet in the US).