Westec Show in Cali

[cadcam]

Well it is here again another year of Westec.
Hope to see some of you there.
Make sure to stop by the Mastercam Booth and get a peak at Mastercam X2 MR1.


Here is a link for info.
http://www.sme.org/cgi-bin/get-event...7-020163--SME-

[kenbarra]

I'm there, er, here. I'll stop by MasterCAM on Tuesday. I have SME businees all day Monday.
Any place else that is a don't miss?
Ken (visiting from Atlanta)

[cadcam]

Did you go to the 1pm SME confrence my friend was the first speaker.
I would go to most of the Cad-cam booths they are all around the Mastercam booth.

[teal854t]

Hi,
I have a 17 year old and want to take him to the show. How can I register him?
Thanks

[cadcam]

Thursdays are for kids from schools and trade schools. the beginning of the week as I know you must be 18 or older to get in.

Check here=
http://www.sme.org/cgi-bin/get-event...7-020727--SME-

[Geof]

Originally Posted by cadcam .....the beginning of the week as I know you must be 18 or older to get in.......

That is sooooo ludicrous. I was fifteen years and three months old when I started my apprenticeship as a Machinist. So I would have needed to wait for 2-1/2 years before going to a show like Westec?

[cadcam]

Now come on,how many start a apprenticeship as a Machinist at 15 ? At least not out here maybe in Canada.But as I stated the schools come thru on Thursday this day is for the schools and the tech schools.

[Geof]

Originally Posted by cadcam Now come on,how many start a apprenticeship as a Machinist at 15 ? At least not out here maybe in Canada.But as I stated the schools come thru on Thursday this day is for the schools and the tech schools.

It was in New Zealand over forty years ago. I don't think it happens anywhere these days.

[kuno]

hello

[cadcam]

(It was in New Zealand over forty years ago. I don't think it happens anywhere these days.) It is really sad that it dose not happen any more..

Hello Kuno...

[clint_so]

Do they allow the average attendee to bring a hand held video camera into WESTEC?

It would be nice in case there was a need for documenting areas of interest, because not all businesses can send their management to the show.

[cadman]

Originally Posted by clint_so Do they allow the average attendee to bring a hand held video camera into WESTEC? It would be nice in case there was a need for documenting areas of interest, because not all businesses can send their management to the show.

No, cameras or video recorders are not allowed. With cameras built into cellphones now, it certainly brings up a grey area though.