- Need Help!- X axis off from center of pallet rotation
-
Registered
X axis off from center of pallet rotation
So I run a toyoda vf 60, and am boring a part 180 degrees apart on the B axis. My bores are coming out .002" offset. so if I put a .001" in the common offset they come out perfect. I am wondering if there is a parameter I can change to offset where machine X zero is to solve the problem for future machining?
Similar Threads:
-
-
Registered
Re: X axis off from center of pallet rotation
Oh and I am using the side of a tombstone and using Machine coordinates to machine my part. so one side would be X-15.2171 and the other X15.2171, thanks.
-
Registered
Re: X axis off from center of pallet rotation
If anyone has any answers as to how I can solve this problem I would be greatly appreciative!
- Need Help!- X axis off from center of pallet rotation
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules