B Axis Adjust


Results 1 to 2 of 2

Thread: B Axis Adjust

  1. #1
    Registered
    Join Date
    Jun 2015
    Location
    US
    Posts
    1
    Downloads
    0
    Uploads
    0

    Default B Axis Adjust

    B and Z are not perpendicular. Do you have a procedure ? It is a FA 800 3 piece Curvic

    thanks, Carl

    Similar Threads:


  2. #2
    Member
    Join Date
    Feb 2009
    Location
    usa
    Posts
    6028
    Downloads
    0
    Uploads
    0

    Default Re: B Axis Adjust

    B&Z? did you rotate B 180 and see if you get the same reading? If so, adjusting the B won't help. You either have a leveling problem on the machine, or something much worse going on.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

B Axis Adjust

B Axis Adjust