Spindle upgrade video !

[Scott_M]

I recently got my spindle upgrade installed and thought you guys would like to see this. It is some simple start stop code to see how fast it spins up , brakes and restarts. I always had a problem with the long dwell times before a restart of the spindle. This is awesome !! The braking from 5000 rpm is pretty impressive. as is the varible dwell on the restart. If you watch the flashing yellow spindle LED on the Mach 3 screen you can see it is pretty well timed. Good work John !!
I have not done much cutting yet, when I get into something worth posting I will.

Scott

"http://www.youtube.com/watch?v=H2Gh_P4AcWo"]http://www.youtube.com/watch?v=H2Gh_P4AcWo&fmt=18

[Scott_M]

For those interested
the code is


M3 S250
M5
M3 S500
M5
M3 S1000
M5
M3 S2000
M5
M3 S3000
M5
M3 S4000
M5
M3 S5000
M5
M30