| |
| Home Page | Mark Forums Read | Today's Posts | My Replies | Classifieds | Reviews | Photo Gallery | Web Links | Share Files | Advertise With Us | Ad List |
| |||||||
| Tormach PCNC Discuss Tormach PCNC machines here. |
| | |
| This forum is sponsored by: |
 |
| | LinkBack | Thread Tools | Search this Thread | Display Modes |
|
#2
 
02-06-2009, 07:55 PM
| ||||
| ||||
| John, since the spindle motor is 3-phase, you should be able to just swap any two of its leads going to the VFD to change the direction of rotation. Randy    |
|
#4
02-06-2009, 11:13 PM
| ||||
| ||||
| You're welcome, John. Just for trivia, you can also change the rotation of a stepper motor by swapping the leads of one of its two coils... Randy |
|
| | |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | Search this Thread |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| New T Hold downs installed | wcarrothers1 | DIY-CNC Router Table Machines | 3 | 12-07-2008 01:57 PM |
| My 500W 10.5A 48V PSU is here and installed. | alexccmeister | Benchtop Machines | 3 | 09-25-2008 08:20 AM |
| Problem- Tech installed spindle motor fan backwards (now #9) | carbidecraters | Fadal | 3 | 07-09-2008 10:09 PM |
| Simple, 3 Axes with Dual Drive/Motor (per axis), hardware splitter drive Interface. | kreutz | Stepper Motors and Drives | 3 | 07-03-2008 07:57 PM |
| Macro B installed? | grweldon | Fanuc | 8 | 07-09-2007 02:19 PM |
| | |
Linear Mode
