Newbie Edge Break Width in Converstational


Results 1 to 2 of 2

Thread: Edge Break Width in Converstational

  1. #1
    Member
    Join Date
    Jul 2005
    Location
    Eastern Oregon
    Posts
    194
    Downloads
    0
    Uploads
    0

    Default Edge Break Width in Converstational

    I am just getting started with my SlantPro and going through the first test part. The cutoff screen in the tutorial is from an older Path Pilot and doesn't have the setting for Edge Break Width. What's a good setting to use here?

    Similar Threads:


  2. #2
    Member
    Join Date
    Jul 2005
    Location
    Eastern Oregon
    Posts
    194
    Downloads
    0
    Uploads
    0

    Default Re: Edge Break Width in Converstational

    Quick note to Tormach and they responded right away. Go with .01 as a starting point for the Edge Break Width.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Edge Break Width in Converstational

Edge Break Width in Converstational