5 Axis Machining on Tormach?
Registered
5 Axis Machining on Tormach?
I'm just looking on those tilting motorized rotary tables (P/N 31996 and 31997) and wondering if there is any chance that Tormach adds another stepper to these tables to allow 5 axis machining? Similar Threads:
Registered
Re: 5 Axis Machining on Tormach?
There's no driver or connection available in the electrical cabinet for a 5th axis, so as far as I'm aware nobody has done it.
Member
Re: 5 Axis Machining on Tormach?
Here's a video of a 5 axis on a Novakon Pulsar. The Pulsar is about the size of the 770. Not sure how he did it but you could ask him.
Registered
Re: 5 Axis Machining on Tormach?
It's also worth noting the Skyfire CNCs come (optionally) with a 5-axis controller.
Registered
Re: 5 Axis Machining on Tormach?
Tormach actually did a prototype, and there was a video here...
https://www.tormach.com/blog/new-adv...th-axis-pcncs/
But they seem to have removed the video, although the story of the prototype is still there. I saw the video earlier this year.
5 Axis Machining on Tormach?
Tags for this Thread
Posting Permissions
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
Forum Rules