This is the 440 spec sheet.
Table size is 18" x 6.3"
https://www.tormach.com/document_dir...tml?doc_id=943
What is the size of the 440's table?
Similar Threads:
- Looking for a small facing tool (fly cutter / face mill / indexable end mill)
- Selling components off 3 axis Supermax mill CNC Knee Mill, Kmotion, Where, interest?
- Mastercam X8-X9 2D Mill, 3D Advanced Mill, Solids & Lathe Video Tutorial Bundle
- Mastercam X8-X9 2D Mill, 3D Advanced Mill, Solids & Lathe Video Tutorial Bundle
- Need Help!- Looking to buy this mill, Seller States Bridge port mill BOSS 7.2 retro
This is the 440 spec sheet.
Table size is 18" x 6.3"
https://www.tormach.com/document_dir...tml?doc_id=943
Lee
I might be intetested in a 440 if it had 12 or 14 inches of Z axis. I run a lot of parts that are 7 inches long and I have to drill a hole 4 to 4 1/2 inches deep.
You can buy GOOD PARTS or you can buy CHEAP PARTS, but you can't buy GOOD CHEAP PARTS.