I installed Gary's fan today, I love it,I also installed it without taking the motor off.I used the same meanwell brick as he did, I chose to mounted it on the outside of my cabinet behind my machine,I have it plugged into a surge protector along with my computer for now I may change it later,
I received a request for a Fan Shroud that would accept a 120MM X120MM X 38MM fan. This is another standard fan format that is identical to the 120MM X 120MM x 25MM fan I was originally using before except that it is taller. The taller fan is apparently available in 110VAC and other voltages. This is the format he wanted to use and it is available on Amazon and e-Bay. So I now have a taller fan shroud if that fits someone's purposes better.
I can supply the fan kit LESS the fan (in other words you use your fan) if this helps. You would need to verify your clearance to the door switch on your machine. The extended shroud is 13mm taller for a total height of 113mm measure from the bottom of the existing metal skirt.
The photos show the original fan shroud next to the extended fan shroud.