I just purchased the revised SpindleSpeeder from Tormach. I bolted it as per instructed and ran a warm up program on it....
I find its a lot louder than I expected. It has not be used yet. I am going to etch a LOGO into 15 parts, that are 6061 with .031 cutter. At 5140 RPM it takes about 65 minutes after all the improvements to the program I can do.
Anyway--I just wanted some feedback or advise from someone who has the revised unit, about what I might expect....
Thanks,
Jim
Anderson Prototypes
(JourneyMan Machinist 28 years--in business 5 years--Tormach 1100--2,)
I've been using the beta prototype for about a half year and have been very happy with it. Prior to that I used the first version for a few years. - Terry