- New Machine Build- Freedom NC200 PathPilot Refit
-
Member
Freedom NC200 PathPilot Refit
I have started an refit of a Infimatic Freedom NC200 to PathPilot. I am going to use this for my Denford Triac refit. I have changed the mother board and added a 10.4" touch screen display. I have a second Gizmosphere 1 that will be used in a step/dir set-up. I can lower the cost of the iBOB2. The Gizmosphere is a great board in that its BIOS is completely open source. If anyone is interested, please let me know. Iron-Man
Similar Threads:
Last edited by Iron-Man; 01-12-2018 at 12:17 PM.
Reason: Info
-
-
Member
Re: Freedom NC200 PathPilot Refit
I added a dvd drive. Used my Sherline to make the cut-out.
The Sherline uses a CNC system I designed a few years ago.
Touch screen is now operational.
http://www.cnczone.com/forums/bencht...3-posts-4.html
Iron-Man
- New Machine Build- Freedom NC200 PathPilot Refit
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules