PP 2.0 RapidTurn bug confirmed

Results 1 to 5 of 5

Thread: PP 2.0 RapidTurn bug confirmed

  1. #1
    Member
    Join Date
    Jul 2016
    Location
    United States
    Posts
    140
    Downloads
    0
    Uploads
    0

    Default PP 2.0 RapidTurn bug confirmed

    FYI - Tormach has confirmed a RapidTurn bug in PP 2.0 in which it wont execute programs. Its very similar to the spindle sensor issue in its symptoms.

    No ETA and I dont have any more information than that. Just letting you RT people know.

    Similar Threads:
    Tormach PCNC 1100 Series 3 w/ Rapid Turn, Fusion 360


  2. #2
    Member
    Join Date
    Mar 2016
    Location
    United Kingdom
    Posts
    54
    Downloads
    0
    Uploads
    0

    Default Re: PP 2.0 RapidTurn bug confirmed

    Quote Originally Posted by sharmstr View Post
    FYI - Tormach has confirmed a RapidTurn bug in PP 2.0 in which it wont execute programs. Its very similar to the spindle sensor issue in its symptoms.

    No ETA and I dont have any more information than that. Just letting you RT people know.
    Many Thanks for this - I received my PP2.0 update yesterday and was JUST about to apply it when I saw this. My next job is to use the RapidTurn so I'm pleased (now) to wait until it's sorted.

    Cheers, Andy



  3. #3
    Registered
    Join Date
    Mar 2017
    Posts
    17
    Downloads
    0
    Uploads
    0

    Default Re: PP 2.0 RapidTurn bug confirmed

    Crap I guess I can delete my other thread this just bit me. I mounted my rapidturn, fired up a parting operation. It hit's g30 runs over z until it hits the right spot, spindle fires up and it halts right there.



  4. #4
    Registered
    Join Date
    Aug 2016
    Location
    United States
    Posts
    9
    Downloads
    0
    Uploads
    0

    Question Re: PP 2.0 RapidTurn bug confirmed

    Quote Originally Posted by punkman View Post
    Crap I guess I can delete my other thread this just bit me. I mounted my rapidturn, fired up a parting operation. It hit's g30 runs over z until it hits the right spot, spindle fires up and it halts right there.

    Is this the problem PP 2.0.1 fixes?



  5. #5
    Member
    Join Date
    Jul 2016
    Location
    United States
    Posts
    140
    Downloads
    0
    Uploads
    0

    Default Re: PP 2.0 RapidTurn bug confirmed

    Quote Originally Posted by drhardin View Post
    Is this the problem PP 2.0.1 fixes?
    According to the release notes it does.

    Fixed IssuesAll Machinesl Some files are not correctly recognized as G-code, and the File tab will not load them. (PP-1887)Millsl Resolved a RapidTurn® pausing issue when using G-codes dependent on spindle speed sensing.Lathel Resolved a rare G96 arc blend following error.

    Tormach PCNC 1100 Series 3 w/ Rapid Turn, Fusion 360


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

PP 2.0 RapidTurn bug confirmed

PP 2.0 RapidTurn bug confirmed