feedrate

Results 1 to 5 of 5

Thread: feedrate

  1. #1
    Member popspipes's Avatar
    Join Date
    Jun 2014
    Location
    United States
    Posts
    1777
    Downloads
    0
    Uploads
    0

    Default feedrate

    Anyone else notice this little anomally??





    Maybe we are going to get a boost in the feedrates eventually??

    Similar Threads:
    Attached Thumbnails Attached Thumbnails feedrate-135-feedrate-jpg  
    mike sr


  2. #2
    Member
    Join Date
    Dec 2008
    Location
    Switzerland
    Posts
    740
    Downloads
    0
    Uploads
    0

    Default Re: feedrate

    Quote Originally Posted by popspipes View Post
    Anyone else notice this little anomally??





    Maybe we are going to get a boost in the feedrates eventually??
    I thought you had a PCNC1100? That's the feedrate for the 770 and I believe your screenshot also displays "770" along the bottom edge!
    How did that happen?
    Step


    Sent from my iPhone using Tapatalk



  3. #3
    Member popspipes's Avatar
    Join Date
    Jun 2014
    Location
    United States
    Posts
    1777
    Downloads
    0
    Uploads
    0

    Default Re: feedrate

    Quote Originally Posted by TurboStep View Post
    I thought you had a PCNC1100? That's the feedrate for the 770 and I believe your screenshot also displays "770" along the bottom edge!
    How did that happen?
    Step


    Sent from my iPhone using Tapatalk
    I do have an 1100.
    Looks like I missed the boat again Step!! This is a snip of one of the Tormach quicktip videos, I just didnt pay proper attention to the machine they were using, my bad??

    mike sr


  4. #4
    Member
    Join Date
    Dec 2008
    Location
    Switzerland
    Posts
    740
    Downloads
    0
    Uploads
    0

    Default Re: feedrate

    Quote Originally Posted by popspipes View Post
    I do have an 1100.
    Looks like I missed the boat again Step!! This is a snip of one of the Tormach quicktip videos, I just didnt pay proper attention to the machine they were using, my bad??
    Nice one Mike
    You got me pondering all the possibilities! The bad news is that they're also not planning to uprate the spindle to 10k either...
    Step


    Sent from my iPhone using Tapatalk



  5. #5
    Member popspipes's Avatar
    Join Date
    Jun 2014
    Location
    United States
    Posts
    1777
    Downloads
    0
    Uploads
    0

    Default Re: feedrate

    I have the series 3 1100, I have the xy at 120 rapid and the z at 102 by changing the .ini file, it can go much faster but I changed the accel decel files to do it and I didnt like the movements it made, it was as if something was loose, so I changed it back to normal settings again and just bumped the max up a bit.

    The Z could use a serious increase in speed though............

    mike sr


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

feedrate

feedrate