Newbie Torchmate 4x4


Results 1 to 2 of 2

Thread: Torchmate 4x4

  1. #1
    Registered
    Join Date
    Sep 2016
    Location
    United States
    Posts
    2
    Downloads
    0
    Uploads
    0

    Default Torchmate 4x4

    My torchmate 4x4 is not cutting to scale. Things that were created at 4 inches are cutting at 8 inches. Where are the settings located so I can reset them

    Similar Threads:


  2. #2
    Registered
    Join Date
    Nov 2015
    Posts
    10
    Downloads
    0
    Uploads
    0

    Default Re: Torchmate 4x4

    In the cutting software on the import scree there is a scale factor. Make sure it's not set to two instead of one.

    Sent from my SM-G900V using Tapatalk



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Torchmate 4x4

Torchmate 4x4