Hello from Fiji,
We are having problems with our AVHC.
The machine travels to the first cut but the torch doe not descend to sense the plate and of course no cutting.
We cleaned and oiled the lifter station, replaced teh bearings, even bought a new motor, still nothing.
The relay actuates and closes the cutting circuit, but somehow no signal is sent to the lifter station?
Has anybody encountered a similar problem?
Any help much appreciated.
We had the same problem. They told us that it was our black driver box and sent us a new one. That seemed to help. Then they also had us adjust our torque and that fixed most problems.