Torchmate Software Driver needed

[MikeTX]

Does anyone have a driver for the Torchmate2 table? I got the wrong one with my system and from customer service. If you have one, can you sent me the files? The files will be in the Torchmate3 software in the driver file.

Thanks, Mike

[Dugg]

If you got the wrong one with your system from customer service, what did customer service say when you advised them of the problem?

Also, is their customer service that bad that they haven't corrected this problem for you?

[jmsrbrt]

Does anyone have a driver for the Torchmate2 table? I got the wrong one with my system and from customer service. If you have one, can you sent me the files? The files will be in the Torchmate3 software in the driver file.

Thanks, Mike

Is your signal generator USB or serial?

[Mike@Torchmate]

I would assume this has been resolved, but if not give us a call and we will make sure you get the right drivers. The drivers are in the default installation directory of the Torchmate Drivers software, so you should have them.

If you are needing the 64 bit drivers (as there are only two available drivers, 32 and 64 bit) just specify when asking.

-Mike