I am beginning the process of building a Torchmate 1 kit I bought some months ago and have a few questions for the more experienced owners.
I see that a y-axis upgrade to linear rail/slides is recommended. Ok, I can do that.
I also noticed a thread about x-axis gear rack cleaning. I'm going to look at mounting the rack upside down to try and avoid fouling.
My question is: does it make sense to go to a linear rail/slide on the x-axis too? Do the cam followers on the x-axis cause problems like those noted on the gantry or are they ok there?
Mike @ Torchmate.com | www.Torchmate.com
Toll Free : (866) 571-1066 M-F 7:30am-4pm PST