We are just getting started and every time we cut a job with an interior cut out they end up in the wrong place. This happens with files we have purchased as well as files we have digitized. Any help or advise is greatly appreciated.
The problem is that there is either a mechanical slippage on the machine, causing the machine to cut objects in the wrong location, or that the machine is trying to rapid travel too quickly in between cuts and is binding up and loosing position.
There is a lot to cover both mechanically and in the software to find out what is causing it and how to fix it, I'd recommend giving us a call to have one of us walk you through it. 866-571-1066 x3
Mike @ Torchmate.com | www.Torchmate.com
Toll Free : (866) 571-1066 M-F 7:30am-4pm PST