I have probably a stupid question, but here goes. I have a TM3 with AVHC and I am trying to connect the raw arc voltage from an A80 to the AVHC. Was I supposed to get the wire and if not what guage do I use. Thanks
The wire you provide yourself, we would recommend a 16 gauge or thicker wire pair that we run through the vent on the back of the unit.
On the inside of the A80 the + goes to WORK1 and the - goes to ELECTRODE1.
Mike @ Torchmate.com | www.Torchmate.com
Toll Free : (866) 571-1066 M-F 7:30am-4pm PST