TEK5 servodrive problems


Results 1 to 4 of 4

Thread: TEK5 servodrive problems

  1. #1
    Registered Harmpy35's Avatar
    Join Date
    Jul 2005
    Location
    Netherland
    Posts
    25
    Downloads
    0
    Uploads
    0

    Unhappy TEK5 servodrive problems

    Dear CNC colleges,

    I´m driving an old flatbed plotter with is capable of reaching high speeds (25meters per minute) and with high precision. (2500 count Haidenhein encoders) (0.01mm per count)

    BUT

    This system isn't tune able!!!
    After years, evenings, hours of tuning by 3 small pot meters en my DeskCNC software, the drive still go at random in the fault mode!

    I think this problem is born tho the high count encoders i use.

    Can anybody help me? Give me some advise?
    Maybe there is somebody that has experience with this drives?

    Thanks by forehand,
    Harmen
    The Netherlands

    Similar Threads:


  2. #2
    Registered Harmpy35's Avatar
    Join Date
    Jul 2005
    Location
    Netherland
    Posts
    25
    Downloads
    0
    Uploads
    0

    Default



    Hello????

    Is there anybody????




    I thought there are CNCTeknix people over here???



  3. #3
    Registered
    Join Date
    Mar 2008
    Location
    Australia
    Posts
    267
    Downloads
    0
    Uploads
    0

    Default

    Hello Harmpy,


    Yu can reach Pete Dunster at CNCTeknix via their web site



  4. #4
    Registered Harmpy35's Avatar
    Join Date
    Jul 2005
    Location
    Netherland
    Posts
    25
    Downloads
    0
    Uploads
    0

    Default

    Hello Zig,

    I've finally got in tough with CNCTeknix, but, it was hard to get it. So because of that i tried it by CNCZone.

    Thanks! Harmen.



Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

TEK5 servodrive problems

TEK5 servodrive problems