Is there any way to control my vfd spindle using a serial interface and the mod bus protocol? I have a lc4896 with the standard motors and controller. I also bought a USB to rs485 adapter and I hope I could use that with the techno controller software.
I'm not afraid of producing any cables or other electronic work that needs to be done. I just need to know what has to be done!
[url]Http://www.glenspeymillworks.com[/url] *Techno LC4896 - 2.2Kw Water Cooled Spindle | *Moving Table Mill from an Omis 3 CMM, 500Lb granite base, Hitachi router, Mach3