So far this has been a solid update! I've been machining a lot of aluminum lately and this has been giving me consistent times! I haven't tried jerk reduction yet.
On a side note, at random times, when I press the pause button on the remote, the interface gives me a M3 error saying it has no power to the z axis. It then disables the amps. and asks me if I would like to enable them but the yes button is not present. It only says No. I press no and then I can press start. The machine does not loose its DRO but it is annoying all the same. This error happens on both the release interface and the beta as well. But i swear it only started after installing the beta.
I also have another problem where the interface crashes when I try to skip ahead in a job that has just been started. I start the job using the mouse and it pauses asking for the bit change. I then hit skip and enter the percentage for the skip. I press accept and the interface loads to the skip point. I hit start and the interface crashes with a runtime error. This error has been persistent for the past year. I have been able to skip after waiting for the router to actually move at the start of the job.
I bet both of these errors are linked in some way to the windows XP install I am running.
Thanks for continuing your work with the interface. I always look forward to seeing other improvements as they come down the pike!