Identify this Techno gizmo and spindle?


Results 1 to 6 of 6

Thread: Identify this Techno gizmo and spindle?

  1. #1
    Member
    Join Date
    Aug 2009
    Location
    us
    Posts
    119
    Downloads
    0
    Uploads
    0

    Default Identify this Techno gizmo and spindle?

    Techno part # H22T59-DXF-C. Can anyone tell me what this is and what it's used for? Came with a DaVinci I bought at auction.

    I'd also like to know more about the spindle, has no markings at all.

    Similar Threads:
    Attached Thumbnails Attached Thumbnails Identify this Techno gizmo and spindle?-1-jpg   Identify this Techno gizmo and spindle?-2-jpg   Identify this Techno gizmo and spindle?-3-jpg   Identify this Techno gizmo and spindle?-4-jpg  

    Identify this Techno gizmo and spindle?-5-jpg   Identify this Techno gizmo and spindle?-6-jpg  


  2. #2
    Member john-100's Avatar
    Join Date
    Mar 2007
    Location
    uk
    Posts
    2083
    Downloads
    0
    Uploads
    0

    Default Re: Identify this Techno gizmo and spindle?

    photo 3 gives you a clue
    the yellow box is an electronic Key for the software from Aegis

    the box plugs into the PC's printer port and passes the signals through to your printer or what ever you connect to it
    inside will be either a serial rom or PIC CHIP with date the control softwares looking for before it will run

    John



  3. #3
    Registered
    Join Date
    Oct 2015
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default Re: Identify this Techno gizmo and spindle?

    Spindle looks like the Kress 600 ER that came with my XYZ gantry table.

    Yeah, really late response.



  4. #4
    Member
    Join Date
    Aug 2009
    Location
    us
    Posts
    119
    Downloads
    0
    Uploads
    0

    Default Re: Identify this Techno gizmo and spindle?

    Actually, yours is the earliest response.... Thank you!

    Does 600 ER mean 600 watts and ER collets? My spindle uses the Kress collets.
    Do you know the top rpm?



  5. #5
    Registered
    Join Date
    Oct 2015
    Posts
    7
    Downloads
    0
    Uploads
    0

    Default Re: Identify this Techno gizmo and spindle?

    600 Watt but 50 Hz.

    It used a Kress collet and nut. Nut cracked trying to remove it. And the variable speed adjustment wheel was missing. Replaced it with a DeWalt DWP611. No regrets.



    As late as the response is, I hope it helps. I don't visit here often. When I do, suddenly the entire day is gone.



  6. #6
    Member
    Join Date
    Aug 2009
    Location
    us
    Posts
    119
    Downloads
    0
    Uploads
    0

    Default Re: Identify this Techno gizmo and spindle?

    Thanks for the response. Mine was in good condition, except for runout that was excessive for the micro-miniature endmills I use. But I was able to regrind the taper to within .0003" TIR , and it's been working fine for me.



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Identify this Techno gizmo and spindle?

Identify this Techno gizmo and spindle?