check out these pic's


Results 1 to 3 of 3

Thread: check out these pic's

  1. #1
    Registered
    Join Date
    Jul 2017
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default check out these pic's

    I am restoring a Taig CNC mill I am not sure on the age of the mill. I have found a few minor problems so far. 1. Z lead screw bearings were bad 2. the z nut was the old style. These parts are on order for replacement.

    I just removed the table and found some interesting patterns on the cross casting see pic’s some of it looks like the start of a center-less grinding pattern???


    Has anyone seen this before.




    Similar Threads:
    Attached Thumbnails Attached Thumbnails check out these pic's-img_1173-jpg   check out these pic's-img_1174-jpg   check out these pic's-img_1175-jpg  


  2. #2
    Member
    Join Date
    Jun 2011
    Location
    USA
    Posts
    68
    Downloads
    0
    Uploads
    0

    Default Re: check out these pic's

    The Criss-Cross pattern on the gibs are there for a reason.
    They are there to help retain lube!

    hth,
    Stuart



  3. #3
    Registered
    Join Date
    Jul 2017
    Posts
    8
    Downloads
    0
    Uploads
    0

    Default Re: check out these pic's

    Quote Originally Posted by sclelectronics View Post
    The Criss-Cross pattern on the gibs are there for a reason.
    They are there to help retain lube!

    hth,
    Stuart
    Hello
    I thought so and have seen it before.

    Thanks
    Rick



Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

check out these pic's

check out these pic's