Need help selecting parts for new cnc router build.


Results 1 to 4 of 4

Thread: Need help selecting parts for new cnc router build.

  1. #1
    Registered
    Join Date
    Feb 2017
    Location
    United States
    Posts
    18
    Downloads
    0
    Uploads
    0

    Default Need help selecting parts for new cnc router build.

    So I want to build a cnc router capable of cutting wood and aluminum with full depth of cut on 1/2 inch aluminum with a 48" build area. I have been looking for guides that help in choosing the right components with little success. Specifically are there any guides to choosing the right ballscrews, spindle, and linear rail?

    Similar Threads:


  2. #2
    Member ger21's Avatar
    Join Date
    Mar 2003
    Location
    Shelby Township
    Posts
    35538
    Downloads
    1
    Uploads
    0

    Default Re: Need help selecting parts for new cnc router build.

    The manufacturers of those components have formulas and calculators for selecting the right components.

    If you want something that says you need a certain size to cut a certain depth, then no.

    So, you wan to cut 1/2" thick aluminum in one pass, on a 48"x48" machine? This is probably a very unrealistic goal. Choosing the right components would be the easy part of that scenario.

    Gerry

    UCCNC 2017 Screenset
    [URL]http://www.thecncwoodworker.com/2017.html[/URL]

    Mach3 2010 Screenset
    [URL]http://www.thecncwoodworker.com/2010.html[/URL]

    JointCAM - CNC Dovetails & Box Joints
    [URL]http://www.g-forcecnc.com/jointcam.html[/URL]

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)


  3. #3
    Registered
    Join Date
    Feb 2017
    Location
    United States
    Posts
    18
    Downloads
    0
    Uploads
    0

    Default Re: Need help selecting parts for new cnc router build.

    What is a realistic goal for that footprint and material? I just need a toehold to get started here. I have no concept of what is and isn't realistic with these machines. I thought doing deeper passes was better for the tool than just cutting with the tip. I don't need one pass cuts I just need to be able to use a lot of the tool per pass.



  4. #4
    Registered
    Join Date
    Apr 2015
    Location
    Canada
    Posts
    113
    Downloads
    0
    Uploads
    0

    Default Re: Need help selecting parts for new cnc router build.

    just look at the CNCRP 4848 machines for reference.

    Luthier/Woodworker/Machinist in NS, Canada.


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


About CNCzone.com

    We are the largest and most active discussion forum for manufacturing industry. The site is 100% free to join and use, so join today!

Follow us on


Our Brands

Need help selecting parts for new cnc router build.

Need help selecting parts for new cnc router build.